For hot air tenter and Hot Air Stenter Machine, there should be a subordinate relationship between them. Because there are many types of hot air tenter, including the hot air tenter, so below, we mainly explain the relevant knowledge through some specific aspects of it, so that everyone can increase the amount of knowledge .
The hot air tenter is, in general terms, a type of machine used in industrial manufacturing. So, its understanding is not difficult. Moreover, there are many types of hot air tenter, according to different angles, there are different types. From the professional point of view, the hot air tenter should belong to the big category of fabric or fabric hot air tenter.
Working principle of hot air tenter
It mainly uses heat conduction oil to heat the air in the machine, so as to heat the velvet fabric. When it reaches a certain temperature, hold it for a period of time, and then take out the fabric. In this way, its stereotyped purpose can be well achieved.
- Operation process of hot air tenter
(1) After the fabric processing is completed, the fabric guide is introduced to the operating table so as to send the fabric into the hot-air tenter. And through the operation, the cloth can run into the machine.
(2) Click the button to enter the operation interface of the heating system, so that the heating temperature, heating time and other parameters can be set. At the same time, it is necessary to participate in the removal of moisture in the oven in order to play a certain maintenance role on the oven and extend its service life.
(3) The fabric is heated and heated for the purpose of shaping. When the setting operation is completed, turn off the main control switch of the power cabinet. After the computer automatically stores the processing data, you can cut off the power of the device. After that, it is for the cleaning and maintenance of the equipment.
By explaining the working principle of the hot air tenter, we can know the principle. Familiar with its operation process, it can help everyone to carry out the correct and standardized in practice to avoid errors, thereby improving the use of equipment and operating efficiency. Moreover, this is also a very good protection for the hot air stenter.